Produced Water Treatment
Treatment of produced water containing oil, suspended solids, dissolved organics, salts and other formation-related contaminants.
Water treatment materials and application-focused solutions for produced water, injection and make-up water, process and utility water, oily wastewater treatment and advanced water reuse across oil and gas operations.
Water is involved throughout oil and gas operations, including production, injection, separation, processing, equipment utilities, wastewater management and selected reuse applications.
Produced water and oily wastewater can contain free and dispersed oil, suspended solids, dissolved hydrocarbons, salts, hardness, iron and other naturally occurring or process-related contaminants.
Because water characteristics can vary significantly between fields and operating conditions, treatment may combine oil-water separation, filtration, adsorption, chemical conditioning, membrane treatment and polishing according to the required outlet water quality.
Treatment requirements differ according to whether the water will be discharged, reused, injected or used within plant utility systems.
Treatment of produced water containing oil, suspended solids, dissolved organics, salts and other formation-related contaminants.
Filtration and conditioning of water used for injection and other field applications where solids and scaling risks must be controlled.
Treatment for boiler, cooling, washing and other water systems supporting oil and gas processing facilities.
Advanced treatment and polishing of wastewater for suitable reuse, discharge or further purification applications.
Produced water and process wastewater can contain a complex mixture of oil, solids, dissolved salts and organic contaminants.
Free, dispersed and emulsified oil can increase treatment complexity and require staged separation and polishing.
Sand, corrosion products, precipitates and formation solids can increase filtration demand and downstream fouling.
Selected dissolved organic compounds and hydrocarbons may require adsorption or advanced polishing after primary treatment.
Produced water can contain high concentrations of dissolved salts that affect reuse, membrane treatment and disposal options.
Calcium, magnesium, barium, strontium and other scale-forming constituents can affect piping and treatment systems.
Dissolved or particulate metals can contribute to deposits, discoloration and loading on downstream treatment equipment.
Dissolved and dispersed organics can increase COD and affect biological, adsorption and membrane-treatment stages.
Produced-water composition can change with formation conditions, production stage and operating practices.
Explore treatment approaches for industrial water, oily wastewater, dissolved organics, metals, membrane pretreatment and water reuse.
Treatment for process water, utility water, injection-water preparation and plant-support systems.
Explore Solution →Treatment and polishing for produced water, oily wastewater and other complex industrial wastewater streams.
Explore Solution →Activated carbon and complementary treatment for selected dissolved hydrocarbons and organic contaminants.
Explore Solution →Treatment options for selected dissolved and particulate metals where metal reduction or polishing is required.
Explore Solution →Control solids, hardness, organics, oxidants and other fouling risks before reverse osmosis.
Explore Solution →Advanced treatment and polishing for suitable process, utility and other reclaimed-water reuse applications.
Explore Solution →Product selection should be based on oil content, contaminant chemistry, salinity, suspended solids, treatment process and required outlet water quality.
Activated carbon for selected dissolved hydrocarbons, organic contaminants and final wastewater polishing.
Explore Products →
Filtration media for suspended solids, particulate removal and pretreatment before polishing or membrane systems.
Explore Products →
Resin solutions for selected ion removal, softening, polishing and specialty water-treatment applications.
Explore Products →
Chemicals for coagulation, scale control, pH adjustment and selected wastewater-treatment applications.
Explore Products →Treatment recommendations depend on the source-water or produced-water characteristics, target contaminants, treatment flow, intended use and required outlet quality.
Produced water, injection water, process wastewater, utility water or another water stream.
Oil and grease, TSS, COD, TDS, hardness, iron, pH and other relevant parameters.
Hydrocarbons, suspended solids, salts, metals, hardness or other identified contaminants.
Average and peak water flow in m³/h or m³/day.
Oil-water separation, flotation, filtration, biological treatment, adsorption, membranes or other systems.
Required outlet quality for injection, reuse, discharge or downstream treatment.
Explore technical articles covering produced-water treatment, activated carbon, hydrocarbon removal, filtration and advanced polishing.
Review common treatment challenges associated with produced water, injection water and oily wastewater.
Read Guide →
Learn how activated carbon can support removal of selected dissolved organics after suitable primary oil and solids removal.
Read Article →
Review suspended solids, oil carryover, adsorption and downstream-treatment considerations for produced water.
Read Guide →Treatment requirements depend on the water stream, oil content, salinity, contaminant profile and intended water use.
Produced water is water brought to the surface during oil and gas production. Its composition can include dissolved salts, oil and grease, suspended solids, organic compounds and naturally occurring inorganic constituents.
Activated carbon is more appropriately used for adsorption of selected dissolved organic compounds and polishing after suitable removal of free and dispersed oil. It should not normally be treated as the primary process for bulk free-oil separation.
Suspended solids can contribute to plugging, deposits and downstream operational problems. Required filtration depends on the injection system and water-quality objectives.
High salinity, oil, suspended solids, hardness and dissolved organics can create fouling and scaling challenges. Significant pretreatment may therefore be required before membrane treatment.
Depending on water chemistry and the intended reuse, produced water may undergo staged separation, filtration, adsorption, chemical treatment and advanced purification before reuse.
Useful information includes the type of water stream, oil and grease, suspended solids, COD, TDS, hardness, metals, treatment flow, existing process and required outlet quality.
Share your produced-water or process-water analysis, target contaminants, treatment capacity, existing treatment process and required outlet quality. Our team can discuss suitable activated carbon, filter media, ion exchange resin and treatment options for your application.
Scan the QR code to connect with us on WeChat.