Boiler Feed Water
Hardness, silica, dissolved salts and other impurities may require control before water enters boiler and steam-cycle systems.
Water treatment materials and application-focused solutions for boiler feed water, cooling water, reverse osmosis pretreatment, demineralization, condensate polishing and wastewater treatment across power generation facilities.
Water is essential throughout power generation, particularly in steam-cycle systems, cooling systems, boiler make-up treatment, condensate polishing and auxiliary plant operations.
Poor water quality can contribute to scale, corrosion, deposits, membrane fouling and reduced heat-transfer efficiency. Boiler and steam-cycle applications can require particularly careful control of hardness, silica, dissolved salts and other contaminants.
Power plant water treatment commonly combines pretreatment, filtration, activated carbon, reverse osmosis, ion exchange, chemical conditioning and polishing technologies according to source-water quality and plant operating requirements.
Different parts of a power plant require different water quality, from raw-water pretreatment to high-purity boiler and condensate systems.
Hardness, silica, dissolved salts and other impurities may require control before water enters boiler and steam-cycle systems.
Treatment for suspended solids, hardness, scaling, corrosion and other factors that influence cooling-system operation.
Reverse osmosis and ion exchange treatment for reducing dissolved salts and producing higher-quality make-up water.
Ion exchange and polishing treatment for maintaining condensate quality and protecting the boiler and steam-water cycle.
Water chemistry can directly influence boiler, cooling, membrane and condensate systems throughout a power generation facility.
Calcium and magnesium can contribute to scale in boilers, heat exchangers, cooling systems and RO equipment.
Silica can become problematic in higher-pressure boiler and steam systems and can also influence membrane scaling.
Dissolved ionic contaminants may require reduction through RO, ion exchange or other demineralization processes.
Particles and colloids increase filtration demand and can contribute to fouling of downstream membrane systems.
Residual oxidants may need to be controlled before chlorine-sensitive RO membranes and selected ion exchange systems.
Organic contaminants can contribute to membrane fouling and interfere with downstream purification processes.
Dissolved gases, salts, pH and other water chemistry factors can influence corrosion throughout plant water systems.
Suspended solids, organics, hardness, iron and other contaminants can affect RO system performance.
Explore treatment approaches for raw water, boiler-feed pretreatment, reverse osmosis, hardness control and wastewater management.
Feed-water and utility-water treatment for boilers, cooling systems and other power plant applications.
Explore Solution →Control turbidity, hardness, chlorine, organics and other feed-water conditions before reverse osmosis.
Explore Solution →Ion exchange softening for reducing calcium and magnesium hardness before boilers or membrane systems.
Explore Solution →Activated-carbon and chemical approaches for dechlorination before chlorine-sensitive downstream systems.
Explore Solution →Advanced treatment and polishing for suitable cooling, utility and other reclaimed-water applications.
Explore Solution →Treatment and polishing of plant wastewater before discharge, reuse or downstream treatment.
Explore Solution →Product selection should be based on water chemistry, boiler and cooling conditions, membrane configuration, demineralization requirements and target water quality.
Cation, anion and mixed-bed resins for softening, demineralization and condensate-polishing applications.
Explore Products →
Activated carbon for dechlorination and selected organic-contaminant removal before downstream purification systems.
Explore Products →
Media for raw-water filtration, suspended-solids reduction and pretreatment before membrane systems.
Explore Products →
Chemicals for scale control, pH adjustment, coagulation and selected boiler or cooling applications.
Explore Products →Treatment recommendations depend on source-water chemistry, plant configuration, boiler and cooling requirements, treatment capacity and target water quality.
Surface water, groundwater, municipal water, reclaimed water or another source.
Hardness, silica, TDS, conductivity, alkalinity, iron, TOC, pH and relevant contaminants.
Boiler operating pressure, make-up requirements and steam-cycle water-quality targets.
Make-up water and treatment flow in m³/h or m³/day.
Clarification, filtration, softening, RO, EDI, ion exchange or condensate polishing equipment.
Required hardness, conductivity, silica or other project-specific treated-water parameters.
Explore technical articles covering boiler-feed treatment, ion exchange, RO pretreatment, silica control and condensate polishing.
Review common treatment stages for raw water, boiler make-up, cooling systems, RO and demineralized water.
Read Guide →
Learn about softening, demineralization, mixed-bed polishing and condensate treatment applications.
Read Article →
Review hardness, silica, chlorine, suspended solids and organic loading before reverse osmosis.
Read Guide →Power plant treatment requirements depend on source-water chemistry, boiler and cooling conditions, membrane design and required system water quality.
Hardness, silica, dissolved salts and other contaminants can contribute to scale, deposits and operational problems in boilers and steam systems. Required water quality depends on boiler conditions and system design.
Ion exchange resins can be used for water softening, demineralization, mixed-bed polishing and condensate treatment. Resin type and configuration depend on the required water quality.
Silica can form deposits under certain boiler and steam-cycle conditions. Its acceptable concentration depends on operating pressure and plant water-quality requirements.
Reverse osmosis is commonly used to reduce dissolved salts before demineralization or higher-purity water treatment. Suitable pretreatment helps protect the RO membranes and maintain system performance.
Condensate polishing is treatment of returned condensate to remove ionic and particulate contaminants before the water returns to the steam-water cycle. Ion exchange resins are commonly used in suitable polishing systems.
Useful information includes source-water analysis, treatment flow, boiler conditions, existing pretreatment, RO or ion exchange configuration and required treated-water parameters such as hardness, silica and conductivity.
Share your source-water analysis, treatment capacity, boiler and cooling conditions, existing process and required water quality. Our team can discuss suitable ion exchange resin, activated carbon, filter media and treatment options for your project.
Scan the QR code to connect with us on WeChat.